$1,399
Kit JBL avec un mixer Yamaha, 2 stands et cables a prix imbatable!
Speciaux temps des fetes!
-Speaker JBL EON Power 15 (x2)
JBL EON 15P
This 2-way 15 in. PA cabinet is internally biamp powered. The biamp design provides dedicated power amps for the low frequency 15 in. driver and the 15 in. compression driver. The lows are driven by 125 watts and the highs by 50 watts. By separating the power amps the cabinet is more efficient and sound quality is more precise. This cabinet features a high-output, neodymium 15 in. driver with a 1.75 in. voice coil. This contributes to its light weight and the portability that everyone loves about the EON line. zZounds is an authorized dealer of JBL products.
-Subwoofer JBL 500 518S
Features: - 500 watts of precise bass power.
- True portability at 65 lbs (29.5kg).
- Compact and rugged enclosure for long lasting and reliable performance.
- Loop-through outputs for easy daisy-chaining and connectivity.
- 36 mm mount socket for sub/satellite mounting with mains.
- Ergonomic handles designed for easy lifting.
- High pass filter and polarity select switches to integrate into your system.
- XLR (2x) and 1/4" speaker line inputs for versatile set-up options.
- Low -frequency Differential Drive driver with neodymium magnet for low-distortion and light weight.
Like the rest of the EON family, the 518S is designed and built with the gigging performer in mind. With enough power to satisfy the most ravenous of bass cravers, and sturdy enough to withstand the abuse of the road, the EON 518S is an outstanding choice for gigging musicians and mobile DJs. Easy to setup and easy to move, the EON 518S offers a great solution for users tired of sacrificing real bass tone in their portable sound rigs.
-Mixer YAMAHA MG82cx
Frequency Response: STEREO OUT, EFFECT SEND (AUX SEND*), MONITOR OUT, REC OUT
GAIN: min (CH 1/5/6) 20Hz -- 20 Hz Nominal output level @ 1kHz: -3.0 -- 1.0 dB
Total Harmonic Distortion (THD + N) STEREO OUT, +14 dBu @ 20 Hz-20 kHz, Input GAIN Control at minimum : 0.1%
Hum & Noise:
CH INPUT 1,2 MIC, EIN (Equivalent Input Noise): Rs = 150 Ohms, GAIN: maximum (CH. 1, 2): -128 dBu
STEREO OUT, STEREO Master control at nominal level and all channel Level controls at minimum: -87 dBu
EFFECT SEND (AUX SEND), all CH. EFFECT (AUX) controls at minimal: 85 dBu
STEREO OUT, STEREO Master Control and one CH fader at nominal level (Ch1,2) : -64 dBu
STEREO OUT Residual Output Noise --100 dB
Crosstalk (1 kHz): Adjacent Input CH 1, 2: -70 dB; Input to Output STEREO L/R, CH 1-2, PAN: panned hard left or right: -70 dB
Phantom Voltage MIC: + 48V
Input HPF: CH 1-5/6, 80 Hz, 12 dB/oct
Input equalization CH 1-5/6 HIGH: 10 kHz (shelving), MID: 2.5 kHz (peaking), LOW: 100 Hz (shelving); CH 7/8, 9/10 HIGH: 10 kHz (shelving), LOW: 100 Hz (shelving)
PEAK Indicator: Red LED turns on when post EQ signal (either post MIC HA or post EQ signal for CH 3/4, 5/6) reaches -3 dB below clipping (+17 dBu).
Internal Digital Effect* : 16 PROGRAM, PARAMETER control, Foot Switch (Digital Effect On/Off)
LED Level Meter, Pre MONITOR Level, 2 x 7 points LED meter (PEAK, +6, +3, 0, -5, -10, -20 dB), PEAK lights if the signal level reaches 3 dB below the clipping level.
Power Supply Adaptor PA-10: AC 35 VCT, 0.62 A, Cable Length = 3.6 m
Power Consumption: 21 W
Dimensions (l x w x h): 15.4" x 14.2" x 5.3"
Weight: 8.8 lbs
-Tous les cables necessaires sont fournis!
-2 Stands pour les 2 speakers
SPECIAUX TEMPS DES FETES!!
